Insulated Pallet Covers

Plan a defined handover stage

For receiving bays, warehouse handovers and short transfers, define when the hood goes on and comes off, how long the load is exposed and whether overhead space allows top-down fitting. Keep required refrigerated storage and transport in place; validate the complete loaded setup against the route before use.

Measure the loaded pallet, not only the pallet base

Record maximum width × depth × height above the pallet deck, including carton bulge, wrapping and overhang. Agree usable inner dimensions and fitting allowance separately. Check installation space above the load and the lower-edge position. Do not infer stock size, thickness or capacity from these images.

W = maximum load width · D = maximum load depth · H = height above the pallet deck (pallet height excluded). Include wrapping and overhang; fitting allowance is agreed separately.

Confirm the laminate and full-size joins

The foil-faced flexible foam option combines a silver outer face with a white foam layer. Confirm composition, thickness, panel width, seam overlap and joining method together. Approve the full-size corner and seam details with a physical sample.

Five covered faces, an open bottom

The cover fits over the top and four sides of the load, leaving the bottom open. Position the lower edge at the pallet deck to keep fork access clear. This configuration has no base pad, zipper, access door, handles or securing straps. Lift only the cover when removing it; never use it to lift the goods.

1. Check that the load is stable, its corners will not snag the cover and there is enough overhead clearance.
2. Unfold the hood, align its corners and lower it evenly without pulling on the laminate. Keep the lower edge clear of fork openings.
3. Remove the cover before accessing the cartons. Check for damage before folding; decide any further use from its condition and the agreed specification.